智能化
可靠性PCB·权威认证
数字化
可靠性PCB·权威认证
小巧化
可靠性PCB·权威认证
联系电话：
400-668-0071
电子邮箱：
ckaszn@163.com
气体、液体、油等与接触部分相兼容和有一定粘度的易堵流体
-0.1...0~0.01...100MPa(量程缩放最小为基本量程的1/5)
量程的1.5倍(l00MPa量程过载为 1.1倍
0.075%FS(典型) 0.05%FS(最大)
+0.5%FS/年
12~36VD C(标定电压24VDC)
-40~150°C ，-40~320°C(压力>[00kPa)
4~20mADC (二线制)，0~5V/1~5V (三线制)
膜片:不锈钢316L,
铸铝合金
氟橡胶
IP65
概述
Overview
CKAS8102G系列高温压力变送器选用耐高温压力传感器作为信号测量元件，被测介质压力经过瓣器上的散热结构传递到传感器上，高精度的信号处理电路位于不锈钢壳体内，将传感器输出信号转换为标准输出信号。
The CKAS8102G series high-temperature pressure transmitter selects a high-temperature resistant pressure sensor as the signal measuring element, the pressure of the measured medium is transmitted to the sensor through the heat dissipation structure on the flap, and the high precision signal processing circuit is located in the stainless steel shell to convert the sensor output signal to the standard output signal.
整个产品经过了元器件、半成品用成品的严格测试及老化筛选，性能稳定可靠。适用于工业现场、石油化工、冶金制造、蒸汽和热能交换的领域。同时能够实压力显示，零点，满程可迁移等要求。
The whole product has undergone strict testing and aging screening of components and semi-finished products, and its performance is stable and reliable. It applies to fields such as industrial sites, the petrochemicals industry, metallurgical manufacturing, steam, and heat exchange. Simultaneously, it can also realize the pressure display, zero point, the migration after full range, and other requirements.
性能参数
Performance parameters
测量介质：气体、液体、油等与接触部分相兼容和有一定粘度的易堵流体测量范围：-0.1~100MPa（量程缩放最小为基本量程的1/5）
Measurement medium: The measurement range of gas, liquid, oil, etc. that is compatible with the contact part and has a certain viscosity is -0.1 ~ 100MPa (the minimum scale reduction is 1/5 of the basic range).
精度等级：±0.075%FS（典型）±0.05%FS（最大）
Accuracy grade: ± 0.075% FS (standard) ± 0.05% FS (maximum)
过载能力：量程的1.5倍（l00MPa量程过载为1.1倍）
Overload capacity:1.5 times the range (the overload range of l 00MPa is 1.1 times)
工作温度：-40~150℃ ，-40~320℃（压力>l00kPa）
Operating temperature:-40 ~ 150 °C,-40 ~ 320 °C (pressure > 100 kPa)
长期稳定性：±0.5%FS/年
Long-term stability: ± 0.5% FS/year
供电电源：12~36VD C（标定电压24VDC）
Power supply:12 ~ 36VDC (standard voltage 24VDC)
输出信号：4~20mADC （二线制），0~5V/1~5V（三线制）
Output signal:4 ~ 20mADC (two-wire system), 0 ~5V/ 1 ~5V (three-wire system)
介质兼容性：膜片：不锈钢316L，
Media compatibility: Diaphragm: stainless steel 316L,
壳体：铸铝合金
Shell: Cast aluminum alloy
O形密封圈：氟橡胶
O-ring seal: Fluororubber
防护等级：IP65（标准），IP67（电缆式可选）
Protection grade: IP65 (standard), IP67 (optional for cable)
外形结构尺寸
Dimensions of shape and structure
选型说明
Description of type selection
CKAS8102G | 中高温压力变送器 Medium and high-temperature pressure transmitter | |||||||||||||||||
CKAS8102G | （防爆）中高温压力变送器 (Explosion-proof) Medium and High-Temperature Pressure Transmitter | |||||||||||||||||
CKAS8102G | 精小型中高温压力变送器 Fine and small medium and high-temperature pressure transmitter | |||||||||||||||||
代号 Code | 压力形式及量程范围 Pressure Form and Range | |||||||||||||||||
G（0～X） | 0-0.01～0～0.01…100MPa（G-表压） 0-0.01-0-0.01... 100MPa (G-gauge pressure) | |||||||||||||||||
A（0～X） | 0～60MPa（A-绝压） 0 ~ 60MPa (A-absolute pressure) | |||||||||||||||||
N（X~0） | -100~0kPa（N-负压） -100 ~ 0 kPa (N-negative pressure) | |||||||||||||||||
代号 Code | 输出信号 Output signal | |||||||||||||||||
A1 | 4～20mADC（二线） 4 ~ 20 mADC (two-wire system) | |||||||||||||||||
A2 | 1～10mADC（三线） 1 ~ 10 mADC (three-wire system) | |||||||||||||||||
A3 | 0～20mADC（三线） 0 ~ 20 mADC (three-wire system) | |||||||||||||||||
V1 | 0～5VDC（三线） 0～5 VDC (three-wire system) | |||||||||||||||||
V2 | 1～5VDC（三线） 1～5VDC (three-wire system) | |||||||||||||||||
V3 | 1～10VDC（三线） 1 ~ 10VDC (three-wire system) | |||||||||||||||||
Y | 用户指定 User specified | |||||||||||||||||
代号 Code | 结构材料 Structural material | |||||||||||||||||
隔离膜片 Isolation diaphragm | 接口 Interface | 壳体 Shell | ||||||||||||||||
22 | 不锈钢316L Stainless steel 316L | 不锈钢 Stainless steel | 不锈钢 Stainless steel | |||||||||||||||
25 | 钽 Tantalum | 不锈钢 Stainless steel | 不锈钢 Stainless steel | |||||||||||||||
26 | 钽 Tantalum | 哈氏合金C Hastelloy alloy C | 不锈钢 Stainless steel | |||||||||||||||
Y | 用户指定 User specified | |||||||||||||||||
代号 Code | 压力连接 Pressure connection | |||||||||||||||||
C1 | M20X1.5水线密封 M20X1.5 waterline seal | |||||||||||||||||
C2 | M20X1.5端面密封 M20X1.5 end-face seal | |||||||||||||||||
C3 | G 1/2外螺纹 G1/2 external thread | |||||||||||||||||
C4 | G 1/4外螺纹 G1/4 external thread | |||||||||||||||||
Y | 用户指定 User specified | |||||||||||||||||
代号 Code | 其它特殊要求 Other special requirements | |||||||||||||||||
B1 | 插件式DIN43650（仅适用JKS316变送器） Plug-in DIN43650 (only available with JKS316 transmitter) | |||||||||||||||||
B2 | 电缆式（1.5）m（仅适用JKS316变送器） Cable-type (1.5) m (only available with JKS316 transmitter) | |||||||||||||||||
M1 | 0～100%线性显示 0 ~ 100% linear display | |||||||||||||||||
M2 | 现场LED数字显示 Live LED digital display | |||||||||||||||||
M3 | 现场LCD数字显示 Live LCD digital display | |||||||||||||||||
d | 隔爆型d II BT4（仅适用JKS308变送器） Exd d II BT4 (only available for JKS308 transmitter) | |||||||||||||||||
I | 本安型I II CT6（仅适用JKS308变送器） Exia I II CT6 (only available for JKS308 transmitter) | |||||||||||||||||
CKAS8102G | （0～1.6MPa） | A1 | 32 | C1 | M3 | ←选型举例Example of model selection | ||||||||||||
1、为方便用户需要，我公司可提供多种规格压力变送器专用散热器配件；
1. Special radiator accessories for pressure transmitters in various specifications are available in our company for the convenience of users.
2、除以上产品结构外，我公司还可以按照用户要求，提供其它结构形式的高温压力变送器和压力控制器产品；
2. In addition to the above product structure, we can also provide other structural forms of high-temperature pressure transmitters and pressure controller products according to users' requirements;
3、其它特殊功能要求，请与我公司联系商榷。
3. For other special function requirements, please contact us.
概述
Overview
CKAS8102G系列高温压力变送器选用耐高温压力传感器作为信号测量元件，被测介质压力经过瓣器上的散热结构传递到传感器上，高精度的信号处理电路位于不锈钢壳体内，将传感器输出信号转换为标准输出信号。
The CKAS8102G series high-temperature pressure transmitter selects a high-temperature resistant pressure sensor as the signal measuring element, the pressure of the measured medium is transmitted to the sensor through the heat dissipation structure on the flap, and the high precision signal processing circuit is located in the stainless steel shell to convert the sensor output signal to the standard output signal.
整个产品经过了元器件、半成品用成品的严格测试及老化筛选，性能稳定可靠。适用于工业现场、石油化工、冶金制造、蒸汽和热能交换的领域。同时能够实压力显示，零点，满程可迁移等要求。
The whole product has undergone strict testing and aging screening of components and semi-finished products, and its performance is stable and reliable. It applies to fields such as industrial sites, the petrochemicals industry, metallurgical manufacturing, steam, and heat exchange. Simultaneously, it can also realize the pressure display, zero point, the migration after full range, and other requirements.
性能参数
Performance parameters
测量介质：气体、液体、油等与接触部分相兼容和有一定粘度的易堵流体测量范围：-0.1~100MPa（量程缩放最小为基本量程的1/5）
Measurement medium: The measurement range of gas, liquid, oil, etc. that is compatible with the contact part and has a certain viscosity is -0.1 ~ 100MPa (the minimum scale reduction is 1/5 of the basic range).
精度等级：±0.075%FS（典型）±0.05%FS（最大）
Accuracy grade: ± 0.075% FS (standard) ± 0.05% FS (maximum)
过载能力：量程的1.5倍（l00MPa量程过载为1.1倍）
Overload capacity:1.5 times the range (the overload range of l 00MPa is 1.1 times)
工作温度：-40~150℃ ，-40~320℃（压力>l00kPa）
Operating temperature:-40 ~ 150 °C,-40 ~ 320 °C (pressure > 100 kPa)
长期稳定性：±0.5%FS/年
Long-term stability: ± 0.5% FS/year
供电电源：12~36VD C（标定电压24VDC）
Power supply:12 ~ 36VDC (standard voltage 24VDC)
输出信号：4~20mADC （二线制），0~5V/1~5V（三线制）
Output signal:4 ~ 20mADC (two-wire system), 0 ~5V/ 1 ~5V (three-wire system)
介质兼容性：膜片：不锈钢316L，
Media compatibility: Diaphragm: stainless steel 316L,
壳体：铸铝合金
Shell: Cast aluminum alloy
O形密封圈：氟橡胶
O-ring seal: Fluororubber
防护等级：IP65（标准），IP67（电缆式可选）
Protection grade: IP65 (standard), IP67 (optional for cable)
外形结构尺寸
Dimensions of shape and structure
选型说明
Description of type selection
CKAS8102G | 中高温压力变送器 Medium and high-temperature pressure transmitter | |||||||||||||||||
CKAS8102G | （防爆）中高温压力变送器 (Explosion-proof) Medium and High-Temperature Pressure Transmitter | |||||||||||||||||
CKAS8102G | 精小型中高温压力变送器 Fine and small medium and high-temperature pressure transmitter | |||||||||||||||||
代号 Code | 压力形式及量程范围 Pressure Form and Range | |||||||||||||||||
G（0～X） | 0-0.01～0～0.01…100MPa（G-表压） 0-0.01-0-0.01... 100MPa (G-gauge pressure) | |||||||||||||||||
A（0～X） | 0～60MPa（A-绝压） 0 ~ 60MPa (A-absolute pressure) | |||||||||||||||||
N（X~0） | -100~0kPa（N-负压） -100 ~ 0 kPa (N-negative pressure) | |||||||||||||||||
代号 Code | 输出信号 Output signal | |||||||||||||||||
A1 | 4～20mADC（二线） 4 ~ 20 mADC (two-wire system) | |||||||||||||||||
A2 | 1～10mADC（三线） 1 ~ 10 mADC (three-wire system) | |||||||||||||||||
A3 | 0～20mADC（三线） 0 ~ 20 mADC (three-wire system) | |||||||||||||||||
V1 | 0～5VDC（三线） 0～5 VDC (three-wire system) | |||||||||||||||||
V2 | 1～5VDC（三线） 1～5VDC (three-wire system) | |||||||||||||||||
V3 | 1～10VDC（三线） 1 ~ 10VDC (three-wire system) | |||||||||||||||||
Y | 用户指定 User specified | |||||||||||||||||
代号 Code | 结构材料 Structural material | |||||||||||||||||
隔离膜片 Isolation diaphragm | 接口 Interface | 壳体 Shell | ||||||||||||||||
22 | 不锈钢316L Stainless steel 316L | 不锈钢 Stainless steel | 不锈钢 Stainless steel | |||||||||||||||
25 | 钽 Tantalum | 不锈钢 Stainless steel | 不锈钢 Stainless steel | |||||||||||||||
26 | 钽 Tantalum | 哈氏合金C Hastelloy alloy C | 不锈钢 Stainless steel | |||||||||||||||
Y | 用户指定 User specified | |||||||||||||||||
代号 Code | 压力连接 Pressure connection | |||||||||||||||||
C1 | M20X1.5水线密封 M20X1.5 waterline seal | |||||||||||||||||
C2 | M20X1.5端面密封 M20X1.5 end-face seal | |||||||||||||||||
C3 | G 1/2外螺纹 G1/2 external thread | |||||||||||||||||
C4 | G 1/4外螺纹 G1/4 external thread | |||||||||||||||||
Y | 用户指定 User specified | |||||||||||||||||
代号 Code | 其它特殊要求 Other special requirements | |||||||||||||||||
B1 | 插件式DIN43650（仅适用JKS316变送器） Plug-in DIN43650 (only available with JKS316 transmitter) | |||||||||||||||||
B2 | 电缆式（1.5）m（仅适用JKS316变送器） Cable-type (1.5) m (only available with JKS316 transmitter) | |||||||||||||||||
M1 | 0～100%线性显示 0 ~ 100% linear display | |||||||||||||||||
M2 | 现场LED数字显示 Live LED digital display | |||||||||||||||||
M3 | 现场LCD数字显示 Live LCD digital display | |||||||||||||||||
d | 隔爆型d II BT4（仅适用JKS308变送器） Exd d II BT4 (only available for JKS308 transmitter) | |||||||||||||||||
I | 本安型I II CT6（仅适用JKS308变送器） Exia I II CT6 (only available for JKS308 transmitter) | |||||||||||||||||
CKAS8102G | （0～1.6MPa） | A1 | 32 | C1 | M3 | ←选型举例Example of model selection | ||||||||||||
1、为方便用户需要，我公司可提供多种规格压力变送器专用散热器配件；
1. Special radiator accessories for pressure transmitters in various specifications are available in our company for the convenience of users.
2、除以上产品结构外，我公司还可以按照用户要求，提供其它结构形式的高温压力变送器和压力控制器产品；
2. In addition to the above product structure, we can also provide other structural forms of high-temperature pressure transmitters and pressure controller products according to users' requirements;
3、其它特殊功能要求，请与我公司联系商榷。
3. For other special function requirements, please contact us.
